?>

On metalshub you can buy and sell ferroalloys and metals.

Below you can find a selection of manganese suppliers

Manganese Main Applications:

Manganese is added to alloy steel, such as structural steel, tool steel, stainless and heat-resistant steel.

Manganese Producers:
  • Assmang Ltd.
  • Bahrain Ferro Alloys BSC
  • Consolidated Minerals
  • Compania Minera Autlan
  • Dongbu Metal Co., Ltd.
  • ERAMET-Comilog
  • Ferroglobe
  • Glencore AG
  • Mizushima Ferroalloy Co.
  • Nippon Denko Co.
  • South32
  • OFZ, a. s.
  • Tata Ferro Alloys and Minerals (FAMD)
Manganese Traders & Distributors:
  • Dowell Resources Co. Limited
  • Euromet SA
  • Grondmet GmbH & Co KG
  • Hargreaves Raw Material Services GmbH
  • Metal Partner GmbH
  • Starligas
  • thyssenkrupp Raw Materials GmbH

DIN Standards: Ferromanganese DIN 17564 – FeMn85C01 or Ferromanganese DIN 17564 – 0.3185

The standard of Ferromanganese

Designation Material Composition, as percentages by mass
name Mn1) C Fe N P S Si Ti V
Ferromanganese Low carbon grade FeMn85C01 Min. 80 0,05 - - - - - - -
Max. 92 0,50 2) - - 0,25 0,030 1,0 3) 0,020 0,020
Low phosphorus and low carbon grade FeMn85C01P015 Min. 80 0,05 - - - - - - -
Max. 92 0,50 2) - - 0,15 0,030 1,0 3) 0,020 0,020
Nitrogen-containing low carbon grade FeMn85NC01 Min. 80 0,05 - 2,0 3) - - - - -
Max. 92 0,50 2) - 2,5 3) 0,15 0,030 1,0 3) 0,020 0,020
Nitrogen-containing low carbon and low phosphorus grade FeMn85NC01P015 Min. 80 0,05 - 2,0 3) - - - - -
Max. 92 0,50 2) - 2,5 3) 0,15 0,030 1,0 3) 0,20 0,20
Medium carbon grade FeMn80C1 Min. 75 4), 6) 0,5 - - - - - - -
Max. 85 6) 2,0 2) - - 0,10 4) 0,030 1,0 3) 0,020 0,020
Nitrogen-containing medium carbon grade FeMn85NC1 Min. 80 0,5 - 1,0 3) - - - - -
Max. 90 2,0 2) - 2,0 2) 0,25 4) 0,030 1,0 3) 0,020 0,020
High carbon grade FeMn75C7 Min. 75 4) 6,0 - - - - - - -
Max. 80 8,0 - - 0,25 0,030 1,0 5) 0,020 0,020
Low phosphorus, high carbon grade FeMn75C7P015 Min. 75 4) 6,0 - - - - - - -
Max. 80 8,0 - - 0,15 0,030 1,0 5) 0,020 0,020
Ferrosiliconmanganese FeMn65Si Min. 58 6), 7) 0,1 - - - - 23 - -
Max. 72 6), 7) 0,5 - - 0,10 0,010 35 0,20 0,20
FeMn70Si Min. 65 7) 0,5 - - - - 15 - -
Max. 75 7) 2,0 - - 0,20 0,010 25 0,20 0,20
1) The manganese content shall not vary by more than 2 % within a consignment.
2) Any lower maximum values within range given subject to agreement.
3) Value applies to molten grades. Sintered grades with a nitrogen content of 5% to 8% available subject to agreement
4) Lower minimum values subject to agreement.
5) A maximum silicon content of 0,5 % shall be subject to agreement
6) Lead content not to exceed 0,05 %.
7) Boron content not to exceed 0,025 %.